Tower System Blast & Recover

If you are blasting in an enclosure with garnet or slag abrasives you can save a fortune in abrasive costs by installing an abrasive recover tower.

This unit is designed for use with Dura-Grit steel grit. Steel grit abrasive can be recycled hundreds of times and will provide perfectly cleaned surfaces at the right profile height.

Use of the abrasive recycling tower reduces average Dura-Grit consumption to only 0.5kg/m2 (0.1lb/ft2). After blasting, simply recover the abrasive with the vacuum hose and the system will recycle the grit to remove all over and under sized waste.

Perfectly cleaned abrasive is deposited into the storage hopper ready for reuse.

The abrasive can be recycled hundreds of times until eventually becomes dust.

The powerful German made Aerzen blower, powered by a 90kw motor, allows 6-15mt/hr abrasive clean up to 60 meters.