Dehumidifier & Cooler

To prevent flash rusting on freshly blasted surfaces dehumidifier model utilised to control relative humidity level within the enclosure.

Dehumidifier designed to provide the following RH levels:

Upon start up reduce RH level from approx. 90% to 50-60%. During blasting maintain RH level at 50-60%. After blasting and before painting maintain RH level at 50-60%.

Incoming ducting and interconnecting ducting to the enclosure wall and blasting ventilation return ducting are included.

Dehumidifiers can be configured to operate in either closed loop or pass through configuration, depending on operation mode selected.

Airflow control dampeners fitted to the ducting automatically control air flow in to and out of dehumidifier depending on operation requirement.